RED2500.1 5,000 Watts Class-D Car Audio Mono-block Subwoofer Amplifier, 1 Ohm Stable, Remote Bass Knob Included

(1 customer review)

$329.99

Class-D Mono-block Subwoofer Amplifier, 5,000 Watts Max Power, RMS 2527 Watts x 1@1 Ohm; RMS 1500 Watts x 1@2Ohm; RMS 840 Watts x 1@4Ohm. Recoil mono amplifiers are stable down to ONE Ohm, giving you the freedom to put even more subs in your system.

Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.

Recoil mono amplifiers come with bass remote control. Use it to customize your bass on the fly with just a turn of a knob.

You’ll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.

Dimensions: 19.7″ x 7.6″ x 2.2″ (500mm x 193mm x 56mm)

9 in stock

SKU: RED2500.1 Categories: , , , ,

Introductions:Recoil engineered the RED2500.1 Class D mono-block subwoofer amplifier to be dominant in both power and reliability. The RED2500.1D is 1-Ohm stable and utilizes a wide array premium components that make it extremely powerful and reliable – such as its high speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 2500 watts RMS power at a 1-ohm load.

Furthermore, the oversized 1/0 gauge power and ground terminals found on the amplifier allow for maximum current flow. You’ll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.

In addition to all of the above features, this model also features 4-way protection circuitry, including electrical shortage, overheating, low voltage, and more.

Specification:

1-Ohm Stable Car Subwoofer Amplifier

Class-D Monoblock Subwoofer Amplifier

4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC

RMS Power at 2 Ohms: 1,500 Watts x 1 Channel (14.4v)

RMS Power at 4 Ohms: 840 Watts x 1 Channel (14.4v)

RMS Power at 1 Ohm: 2,527 Watts x 1 Channel (14.4v)

Peak Power at 1 Ohm: 5,000 Watts x 1 Channel (14.4v)

High Speed MOSFET Power Supply

Soft Turn on Circuit

Frequency Response: 12Hz – 260Hz

Signal to Noise Ratio: 98dB

Bass Boost: 0 – 9dB

Low Pass Filter (Variable): 40Hz – 260Hz

Subsonic Filter: 12Hz – 55Hz

Remote Bass Knob & Wire Included

1/0 Gauge Power and Ground Terminals

Fuse Rating:  250 Amp

Dimensions: 19.7″ x 7.6″ x 2.2″ (500mm x 193mm x 56mm)

Additional information

Weight 11.38 lbs
Dimensions 22.7 × 9.1 × 3.5 in

1 review for RED2500.1 5,000 Watts Class-D Car Audio Mono-block Subwoofer Amplifier, 1 Ohm Stable, Remote Bass Knob Included

  1. Michael David Cummins

    I got this amp on an Amazon.. (I believe it was the same price/sale, here) … On a black Friday deal for a crazy $170!! It came stupid fast. Hooked it up, right away, (had/have a CT Sounds 2Kw that the rca inputs broke on., powering a Deaf Bonce 12″ DB SA-302 2,000w RMS sub) … After hooking it up, I set the gains,…. SLAPPING!! WAS +2-3dB MAX HOLD dB-higher on my indash Epicenter dB meter over the UNDER-RATED CT-2000.1 (YOUTUBE SHOWS CT2Kw PUTTING OUT ALMOST 2,400Wrms! This thing puts out AT LEAST rated power! I was able to get 3 more of these amps before the sale was over, because I had a gut feeling, that these MFs would go up in price, EVEN THO, many people predicted many other amps would do the same,… But hasn’t that I am aware of. I also had another Deaf Bonce Apocalypse DB sa-302 12″ (both dual 2ohm) that I designed a box on winSD that I had to cut all boards, then ASSEMBLE THE ENCLOSURE IN MY TRUNK, of my 05′ Honda Civic Coupe, being that it’s 4.25cu.ft and takes up a majority of the trunk space! I gain matched another one of these, to run the second 12″,… PheeeewwwWEEEE! MF SLAPS!! Pulling cranking amps with two of these, a 150.4 and a 80.4a/b, epicenter, 8ch out dsp, 4 voltage gauges for AGM starting batt, lipo4 aux bank, and AT AMP VOLTAGE, for both RED2500.1s.
    I love this amp. I do recommend it

    • recoilaudio

      Thank you so much for this feedback. We are so glad that we were able to provide a quality product for you to enjoy! – The Recoil Audio Team

Add a review

Your email address will not be published. Required fields are marked *